Unscrewing drive by hydraulic motor plastic closure mold

  • Total 0Page0Records

SINO-PK  Unscrewing drive by hydraulic motor plastic closure mold basic spec. is as bellows,

  •  Unscrewing drive by hydraulic motor plastic closure mold cavity steel:

    Stavax S420 made in Sweden, stainless, heat treatment with HRC50±2

  •  Unscrewing drive by hydraulic motor plastic closure mold core steel:

    DIN 1. 2083 made by Thyssen Krup German, stainless heat treatment with HRC48±2.

  •  Unscrewing drive by hydraulic motor plastic closure mold stripper and slides steel:

    DIN 1. 2316 made by Thyssen Krup German, stainless heat treament with HRC55±2.

  •  Unscrewing drive by hydraulic motor plastic closure mold A/B/C plate steel:

    718 steel made by Shanghai Bao steel, prehardened with HRC35±2, Nickel plating is available.

  •  Unscrewing drive by hydraulic motor plastic closure mold other plate steel:

    P20 steel made by Shanghai Bao steel, prehardened with HRC30±2. Nickel plating is avaialble.

  •  Unscrewing drive by hydraulic motor plastic closure mold guiding system steel:

    SKD 61 made in Japan with HRC61±2.

  •  Unscrewing drive by hydraulic motor plastic closure mold durable parts material:

    Durable copper with lubrication graphite inserted.

  • Unscrewing system material:

    SKD 61 for gear, gear liner, gear rack, tubular sleeve with the heat treatment to the inside of the steel hardness with HRC 40 to 45 and surface hardness more than HRC 60.

  •  Unscrewing drive by hydraulic motor plastic closure mold hot runner system:

    Anole hot runner system professionally design for small volume injection hot nozzle, with the temperature controlling system. Heating elements and thermocouples are made in German.

  •  Unscrewing drive by hydraulic motor plastic closure mold water connectors:

    Nozzle connectors with the water channel on the plate diameter 16mm, water nipple measured up with D.M.E 3/4 B.S.P standard, connected with one stainless water manifold.

  •  Unscrewing drive by hydraulic motor plastic closure mold cavities Nr.:

    SINO-PK  Unscrewing drive by hydraulic motor plastic closure mold cavities Nr. from 2 cavities to 72 cavities.

  •  Unscrewing drive by hydraulic motor plastic closure mold cycle time:

     Unscrewing drive by hydraulic motor plastic closure mold (standard  Unscrewing drive by hydraulic motor plastic closure mold closure mould) cycle time from 5 to 20 seconds if the cavities Nr. from 2 to 72 cavities.

  •  Unscrewing drive by hydraulic motor plastic closure mold stocked standard components:

     

    • -standard screw neck
    • -hot runner nozzle
    • -heating elements
    • -thermocouples
    • -valve pins
    • -wire plugs
    • -durable pcs
    • -water nipples
    • -water manifolds
    • -ejector connectors
    • -o-ring
    • -copper water pipe of the cores
    • ......

     

  •  Unscrewing drive by hydraulic motor plastic closure mold components spare quantity:

    core, cavity, stripper inserts, hot runner nozzle's standard spare is 12.5 to 25% based on the cavities nr. of the closure mould.

  •  Unscrewing drive by hydraulic motor plastic closure mold production safety devices:

    Stroke switches and electric eyes.

  •  Unscrewing drive by hydraulic motor plastic closure mold ejection way:

    by the machine knock out.

  •  Unscrewing drive by hydraulic motor plastic closure mold cooling water:

     Unscrewing drive by hydraulic motor plastic closure mold cooling water need 8 to 15 centigrade degree soft water.

  •  Unscrewing drive by hydraulic motor plastic closure mold cavities C-C distance:

    As min. as possible for  Unscrewing drive by hydraulic motor plastic closure mold X and Y C-C distance.

  • Closure weight tolerance:

    0.1% to 0.25% based on the  Unscrewing drive by hydraulic motor plastic closure mold size and shape.